User Tools

Site Tools


joyrad10

This is an old revision of the document!


Cloud radar JOYRAD-10

JOYCE-JOYRAD10 ©B. Pospichal
Cloud radar JOYRAD-10 installed at Jülich

Principle

JOYRAD-10 is a vertically pointing X-Band Doppler cloud radar MIRA-10 manufactured by METEK GmbH. It is installed at the Forschungszentrum Jülich as part of JOYCE.

JOYRAD-10 History

Period Place Project
10/2018 - today Research Center Jülich, Germany JOYCE

Measurement examples

JOYRAD-35_obs JOYRAD-35_wind
Example time series of JOYRAD-35 observations (radar moments / horizontal wind)

Current observations at quicklook archive

Measurement modes

  • Vertically pointing observations with integration times up to 1 seconds.
  • Full azimuth/elevation scanning capability for horizontal variability of clouds as well as 3D wind vectors in clouds

JOYCE-CF Standard Operation Procedures

  • Standard measurement mode is vertically pointing, 2 second integration time
  • Every 30 minutes one azimuth scan at 83° elevation angle with 6° azimuth resolution (duration ~2 minutes) for horizontal wind within clouds and the boundary layer (if sufficient insects are present)

Calibrations

  • ???

Data quality assurance procedures

  • Check with co-located disdrometer to find out reflectivity offsets
  • Consistency check with other cloud radars

Available datasets

The following data products are provided via Cloudnet with a temporal resolution of 30 seconds. If you would like to have additional data with better resolution or raw Doppler spectra data request sheet and send it to info@joyce.cloud

Dataset Temporal resolution File size Filename Retrieval
Radar reflectivity factor 30 seconds 1 file per day (30-50 MB) YYYYMMDD_juelich_categorize.nc
Doppler velocity 30 seconds 1 file per day (30-50 MB) YYYYMMDD_juelich_categorize.nc
Spectral width 30 seconds 1 file per day (30-50 MB) YYYYMMDD_juelich_categorize.nc
Linear depolarization ratio 30 seconds 1 file per day (30-50 MB) YYYYMMDD_juelich_categorize.nc
Profiles of horizontal wind 30 minutes 1 file per day (30-50 MB) YYYYMMDD_joyrad35_wind_profile.nc
Doppler spectra

Composite products using data from JOYRAD-35

  • Dual-wavelength ratio Ka/X-Band and Ka/W-Band Link to Quicklooks
  • Cloudnet target classification uses Radar moments data from JOYRAD-35. Combined with microwave radiometer and ceilometer observation, clouds are characterized by their geometrical extent as well as their microphysical properties. Data are available via ACTRIS cloudnet website

Cloudnet_target_classification
Example time series of Cloudnet target classification

Specifications

Parameter Specification Remark
Frequency 35.5 ± 0.15 GHz corresponds to wavelength of 8.5 mm
Peak power (max) 25 kW
Average power ~ 24 W
Pulse width 200 ns adjustable (100, 200, or 400 ns)
Pulse repetition frequency 5 kHz adjustable (5-10 kHz)
Minimum height 150 m full sensitivity above 400 m
Measuring range 15 km adjustable (7.5-30 km)
Range resolution 30 m adjustable (15, 30, or 60 m)
Antenna beam width 0.6°
Doppler velocity resolution 0.025 m/s depends on FFT length
Maximum unambiguous velocity ±20 m/s
Maximum sensitivity at 5 km (integration 0.1 s) -45 dBZ
Calibration system accuracy ±0.5 dB
Number of gates (with simultaneous stored raw data) 500
Number of averaging spectra 200 adjustable (1-32768)
Manufacturer Metek
joyrad10.1597653021.txt.gz · Last modified: 2020/08/17 10:30 by bpospich